Adam Audio A4V Active Studio Monitor
Precision Mounting Guide
The Adam Audio A4V Active Studio Monitor is compatible with the SM-UM1 and requires the Adam A-Series Adapter Plate. The SM-WM1 is optional.
*For some applications including ceiling mounting, you will need to mount the speaker upside down.* In this event, the waveguide and tweeter module can be rotated
Precision Mounting Solutions for Adam Audio A4V Active Studio Monitor
- UM1
UM1
SM-UM1 Recommended Components
The SM-UM1 is our most affordable speaker mount. Its universal face plate works with many speakers under 25 pounds. With the ability to adjust pan and tilt and lock positioning with geared fittings, the SM-UM1 is perfect for Dolby Atmos rooms where lighter speakers are being used.Â
A Series Mounting Plate by Adam Audio
WM1 Wall Mount
SM-UM1 Installation Instructions
UM1 Universal Speaker Mount
When possible, it’s best to adjust your speaker to the desired pan and tilt before mounting to the wall. The WM1 makes this process much easier.
Attaching Your Adam Audio A4V Active Studio Monitor to UM1
The A Series Mounting Plate by Adam Audio connects your speaker to the SM-UM1.
Attaching to the Wall or Ceiling
The WM1 is optional in the UM1 System, however, it’s highly recommended to improve your installation workflow.Â
If using the WM1, press it against the wall at your desired location and mark the mounting holes with a pencil. Then pre-drill into studs or place your anchors. Attach the WM1 to your wall.
If mounting the UM1 directly to the wall, place it in the desired location and mark the mounting holes. Pre-drill into studs or place anchors as with WM1, but mount it to the wall after connecting your speaker to the system.